New Water Wells For Hunt County Acreage
Buying acreage with no well, or your old one's finally quit for good. We site, drill, case, and equip a private well sized to your household, not a one-size rig job.
New Well Pricing
Well costs swing widely across Texas depending on region, rock type, and depth, so a single statewide figure won't tell you much about your job specifically. What matters here is the geology under Hunt County: mostly clay, sand, and shale on the way to water-bearing sand, not the hard rock that drives costs up in other parts of the state.
| Component | Typical Range | What Moves It |
|---|---|---|
| Drilling and casing | $4,500 to $12,000 | Depth, casing diameter, formation |
| Submersible pump and drop pipe | $1,800 to $4,200 | Depth, GPM needed, wire run |
| Pressure tank and controls | $400 to $1,100 | Tank size, switch type |
| Wellhead, pitless adapter, cap | $350 to $900 | Frost line depth, adapter type |
| Water test (bacteria, iron, hardness) | $95 to $250 | Number of parameters tested |
All-in, most single-family new wells around Greenville, Caddo Mills, and Quinlan finish between $6,500 and $18,000. A shallow well on flat ground with easy rig access costs a lot less than a deep well needing a bigger pump and more casing.
How A New Well Gets Drilled
- Site visit and records check. We pull state well records for nearby properties to estimate depth and likely yield before quoting.
- Quote and scheduling. Most jobs book 1 to 3 weeks out depending on rig availability and weather.
- Rig mobilization and drilling through the clay and shale layers into water-bearing sand, logging formation changes along the way.
- Casing and grouting. Steel or PVC casing goes in and gets grouted to seal out surface water and keep the bore from collapsing.
- Development. We surge and pump the well to clear drilling fines and confirm the actual sustained yield.
- Pump and pressure system install, sized to household demand, tank set, wellhead finished at grade.
- Water testing and paperwork: a bacteria and mineral test, plus the completion report filed with the state.
Most new wells take 2 to 4 working days from rig arrival to running water. Longer if we hit a harder shale streak or have to case through unstable sand.
What Slows A New Well Down
- Hitting a dry or low-yield sand lens first. Some spots need a second, deeper attempt to reach a productive sand, which is a real cost risk we talk through before drilling starts.
- Rig access. Wooded acreage or soft ground after heavy rain can mean clearing a path or waiting a few days for the ground to firm up.
- Setback distances from septic systems, property lines, and existing wells. We check these before the rig ever shows up so nobody's redrilling.
- Iron and corrosive water on the downdip side of the local formations, common through much of this part of northeast Texas. It doesn't stop the well, but it usually means budgeting for treatment too. See water treatment.
- Permitting for public water systems serving more than a few connections. That's a different process from a single-family private well and takes longer.
Woodbine Sand, Lake Tawakoni Acreage
Some of our steadiest new-well calls come from buyers closing on raw acreage near Hawk Cove and the shoreline around Lake Tawakoni, where lake-adjacent lots off FM 751 were often never tied into a rural water co-op. Hunt County isn't inside a groundwater conservation district, so the local permitting layer that trips people up elsewhere in Texas mostly doesn't apply here. State law still applies everywhere: any driller doing this work has to hold a Texas Department of Licensing and Regulation driller's license and file a well completion report with the state groundwater database, no matter where in the county the well sits. We'll show you our license number before the rig ever shows up.
One limit worth knowing: we drill single-family and small multi-family domestic wells. We don't drill irrigation-scale agricultural wells or wells for public water systems serving more than a handful of connections.
New Well Questions
How deep will my well need to be?
Most Hunt County residential wells run somewhere between 150 and 350 feet, depending on which sand you hit and how reliable the yield is at that depth. We check nearby state well records before quoting so the estimate is grounded in real local data, not a guess pulled from a statewide average.
What if you hit a dry hole?
Rare, but it happens on the edges of a productive sand. We talk through the risk and a plan B, a deeper attempt or a relocated hole, before drilling starts, so there's no surprise bill if the first attempt underperforms.
Do I need a permit from a groundwater district?
Hunt County isn't currently covered by a local groundwater conservation district, so there's no district permit to pull. The well still has to be drilled by a Texas-licensed driller and reported to the state, which we handle as part of the job.
Will the water need treatment?
Often, yes. Water in this part of northeast Texas tends to run hard, and iron shows up in a fair number of wells, especially on the downdip side of the local formations. We test as part of the new-well package and can quote a softener or iron filter at the same time. See water treatment.
How soon can you start?
Rig scheduling usually runs 1 to 3 weeks out. We don't drill same-day. This is the one service where we ask you to plan ahead instead of expecting an emergency response.
Get A Fast Quote For A New Well
Serving Greenville, Caddo Mills, Quinlan, Lone Oak, and Commerce, TX. Outside that area, call first and we'll tell you honestly if it's in range.